Skip to content
SteelesCorners Locksmith ServicesOpen 24/7 (289) 216-9485
Technician and a seated person comparing two door lever handles on long backplates, one silver and one brass, at a kitchen table. — Steeles Corners

SteelesCorners Locksmith Services

Locks Keys Safes

Locksmith in Steeles CornersDeadbolts installed
the right way

A deadbolt is only as strong as the hole it was bored into and the plate it throws into. In Steeles Corners we install new deadbolts on doors that have never had one, replace worn units on doors that have, and set the strike so the bolt slides home without lifting or leaning on the door.

Request a visit

Same fees day or night · Steeles Corners

Steeles Cornersinformation

YorkOntario

Town
Steeles Corners, York
In business
13 years
Hours
Open 24/7
Nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

2021 census: what it means at the door

Every square is one home in a hundred.

  • 8 in 100 homes · newer homes
  • About 8% of homes in Vaughan were built in 1980 or earlier, according to the 2021 Census.Where most homes are recent, the doors themselves are sound and the work is mostly about keys and control: who holds them, whether contractor keys were retired, and whether one key can open everything. The visit is often more conversation than drilling.
  • Single-detached houses make up about 63% of homes in Vaughan (2021 Census).Where homes are mostly detached, patio and sliding doors deserve attention alongside the hinged ones. Auxiliary locks, pin locks and better latches for sliders are routine additions that a locksmith brings on the same visit as the front door work.

Source: Statistics Canada, Census Profile

Open Steeles Corners in Google Maps

Steeles Corners

Locksmith services · Steeles Corners

Below is the full menu of lock and key work available in Steeles Corners, written for people who are not locksmiths. Each entry says what the service is, when it makes sense, and roughly how a visit unfolds, so you can arrive at the door already knowing what the technician is going to do and why.

Steeles Corners

Below is the full menu of lock and key work available in Steeles Corners, written for people who are not locksmiths. Each entry says what the service is, when it makes sense, and roughly how a visit unfolds, so you can arrive at the door already knowing what the technician is going to do and why.

Job sheet1 of 4

Deadbolt Installation

Person in safety glasses holding a small metal lock cylinder beside a workbench with a red cloth and an open car door. — Steeles Corners
The call
The old deadbolt has grown lazy. You turn the thumb-turn and the bolt creeps out halfway, then needs a second push with the door pulled tight.
First step
How the door hangs and closes

ServiceDeadbolt Installation

Job sheet2 of 4

Lock Replacement & Upgrade

Detached satin-nickel lever hardware, tubular latch and strike plate on a wooden workbench. — Lock Replacement & Upgrade, Steeles Corners
The call
The lever on the side door droops toward the floor and rattles in your hand. The latch no longer springs back on its own, so the door drifts open behind you unless you pull it shut and check it twice.
First step
Exposure, weather and finish

ServiceLock Replacement & Upgrade

Job sheet3 of 4

Safe Opening & Combination Change

Two adults discussing a closed keypad safe in a home study. — Safe Opening & Combination Change, Steeles Corners
The call
The bookkeeper who set the office safe's code retired in a hurry, and the float cash for tomorrow's registers is sitting behind a keypad nobody else in the building can operate.
First step
What is inside and what timing matters

ServiceSafe Opening & Combination Change

Job sheet4 of 4

Safe Installation & Servicing

Person kneeling beside an open black safe with a spirit level on top and loose bolts and a wrench on the concrete floor. — Safe Installation & Servicing, Steeles Corners
The call
The till drawer has been holding two days of cash because the new shop never got a proper safe, and a locked drawer under the counter is the only thing standing between that cash and anyone who works late.
First step
The condition of a safe that is already in place

ServiceSafe Installation & Servicing

Fig.1
Locksmith

High Security Locks

Drawn forSteeles Corners
ScaleNot to scale

Safes are high security for the things inside a room rather than the room itself. We install, bolt down, open and reset them for homes and businesses, and advise on where a safe helps and where a better door helps more.

  1. Layer 1The key

    High Security Locks

    After the attempted break-in the police officer pointed at your door and said the strike plate was held by two short screws. Nobody got in, but you have looked at that door differently every evening since.

  2. Layer 2The cylinder

    Lock Replacement & Upgrade

    The brass handleset has gone blotchy and green where the winter salt reaches it, and the coating on the deadbolt is lifting in flakes. It still locks, but it looks tired beside the fresh paint on the door.

  3. Layer 3The bolt and strike

    Deadbolt Installation

    You moved in three weeks ago. The previous owner left a handful of keys, none labelled, and the bolt on the side door rattles in its housing.

  4. Layer 4The door and frame

    Break-In Damage Lock Repair

    You came home to find the front door standing open. The deadbolt is still thrown, but the strike plate is dangling from one screw and a fist-sized piece of the jamb is lying on the hall floor.

High Security Locks. After the attempted break-in the police officer pointed at your door and said the strike plate was held by two short screws.

Request a visit

Let's clear a few things up

How long should the bolt be?

The bolt should extend at least 25 mm into the frame, which is the standard throw for a dwelling's entrance doors and the length most residential deadbolts provide. Part of the bolt stays inside the door for support while the rest sits in the pocket. A hardened steel insert that spins under a saw blade is a common feature worth having on doors that face a street or laneway.

Can every door in the house work from one key?

Yes, provided the cylinders share a compatible keyway, which the locksmith checks when choosing hardware. New cylinders are pinned on site to a single new key and any existing locks worth keeping are repinned to match. Front, back, side and garage doors commonly end up on one key, and a shed or gate padlock can join them. You then decide how many copies exist and who holds each.

I bought the safe secondhand and have no idea of the combination. Can it still be opened?

Yes. A safe with no known history is treated as an unknown from the start: the locksmith identifies the make, model and lock type directly from the hardware and works through the same manipulation, decoding or reset options used on any other safe. Proof of the purchase or transfer establishes your authority to have it opened, and the process afterward does not depend on any prior record existing.

Will you service a safe that another company installed?

Yes, servicing does not depend on who did the original installation. The locksmith opens the bolt-work, tests the lock through a full cycle, checks the anchoring underneath, and replaces batteries in an electronic lock as needed, regardless of the brand or who fitted it originally. Not knowing the history of the unit just means a slightly more thorough first look before any work begins.

On-site assessment

Request a visit.

Schedule lock work at your Steeles Corners home

(289) 216-9485, open 24/7.