Skip to content
SteelesCorners Locksmith ServicesOpen 24/7 (289) 216-9485
Person holding a black door-handle assembly and a latch beside a glazed door with exposed lock openings. — Smart Lock Installation, Concord

Change or rekey · Concord

Smart Lock Installation

Arthritis has made the small house key hard to grip and turn, especially with gloves on in January. Pressing a few buttons, or tapping a fob against the lock, would make coming home in winter far easier.

In plain words

Our winters shape how a smart lock should be fitted. Cold drains batteries sooner, so the locksmith fits the maker's specified battery type, sets the low-battery alert to reach a checked phone, and shows how a fresh set goes in with gloves on. Meltwater that refreezes overnight can bind a bolt, so the strike is set to give the motor clearance. A storm door that traps summer heat, or a keypad facing driving snow, steers the choice of model and finish. Fitted this way, a smart lock is set up to perform through the cold months, even though batteries and materials still work harder in deep winter than in June.

Sound familiar?Concord

The call
You have just taken possession of the house and the previous owners handed over a keypad deadbolt with a code nobody wrote down and an app account you cannot get into. It needs to become yours, properly, or be replaced.

NextHow the visit goes

Smart Lock Installation · Concord

How the visit goes

Person in safety glasses holding a small metal lock cylinder beside a workbench with a red cloth and an open car door. — Concord
  1. Scene 1

    The other doors and the keys that stay

    A smart lock rarely arrives alone; the back door, the garage entry and the side door still have keys, and the plan should include them. The locksmith asks which doors should share the new arrangement, whether the remaining mechanical locks share a keyway compatible with the smart lock's override so they can be rekeyed to one key, and where that key will live once the family stops carrying keys daily. If the household is dropping keys altogether, a lockbox for the override key or a second keypad becomes part of the conversation. Sorting this out at the start means the whole house ends up on one coherent system rather than a smart front door and a drawer of mismatched keys.

  2. Scene 2

    Fitting the bolt, the body and the strike

    With the door ready, the mechanical parts go in first. The new bolt is set to the door's backset and slid into the edge bore with its face plate flush. The outside assembly, keypad or touch surface, is placed with its cable fed through the cross bore, and the inside mounting plate is fixed so the two halves clamp the door without twisting. Screws are driven by hand rather than with an impact driver, because an over-tightened housing binds the motor. The interior unit is seated on the plate and the tailpiece aligned so the thumb-turn and the motor share the same travel. A reinforced strike with long screws replaces the light original.

  3. Scene 3

    Codes you can give and take back

    The lock now belongs to your account, and the day-to-day control is yours. Adding a code for a new cleaner, setting a weekend window for a visiting relative or removing the dog walker who moved away is done from the app or the keypad in moments, without a locksmith and without cutting anything. A short list of who holds which code, kept somewhere private, is worth writing on day one so the door's access stays as tidy as it is today. Codes should be unique per person and never shared aloud on the step; where the lock offers one-time or scheduled codes, use them for trades and deliveries and let them expire.

In the van

  • Dry PTFE lubricant
  • Smart deadbolt or smart lever set
  • Hole saw, spade bit and drilling jig
  • Hand screwdrivers, Phillips and Torx
  • Wi-Fi bridge or home hub

What shapes the quoteSteeles Corners Locksmith Services

Condition and fit of the door
A door that already closes true with standard holes is the simplest install. One that needs hinges shimmed, a strike pocket deepened or holes enlarged adds preparation time, and that work is quoted as its own line.
Removing an old mortise or non-standard lock
Older doors sometimes carry a mortise case or a lock with an unusual footprint. Filling the pocket, plugging holes and re-drilling to the standard preparation is careful joinery, and it is quoted as preparation.
Pairing a smart deadbolt with a smart lever on the same door
Some doors get a smart deadbolt only, while others pair it with a smart lever below so both turn from one app and share the same codes. Fitting and programming two devices on one door takes more work than one, confirmed once the door and hardware are seen.

FeesSame any hour

Have it ready

Before you call · 0 / 3

(289) 216-9485

Let's clear a few things up

Do I need a hub or a bridge?

Only if the model you choose uses one to reach the internet. Some locks have Wi-Fi built into the interior unit and connect straight to your router. Others save battery by using Bluetooth at the door and a small plug-in bridge nearby to relay to the network. Locks designed for a home hub join whatever hub you already run. The locksmith checks signal strength at the door itself and recommends the arrangement that keeps the lock reliably connected.

What is the difference between a keypad lock, a Bluetooth lock and a Wi-Fi lock?

A keypad lock is operated at the door by code and needs no phone at all. A Bluetooth lock adds phone control when you are within a few metres, which covers most daily use and keeps the lock off the internet. A Wi-Fi lock, either built in or through a small bridge, lets you check and change the lock from anywhere and sends alerts, at the cost of more battery use and a dependence on the home network. Many models combine two of these.

Do I still get a key?

In most cases, yes. The majority of keypad deadbolts keep a conventional cylinder behind or beside the keypad, and the locksmith rekeys it during the visit so a fresh key works and the old one is retired. A few designs have no keyway at all and rely on the keypad plus an emergency power contact instead. Which you prefer is part of choosing the model, and either way the fallback route is tested before the locksmith leaves.

Concordinformation

YorkOntario

Smart Lock Installation · Vaughan, Steeles Corners, Thornhill

Town
Concord, York
In business
13 years
Hours
Open 24/7
Nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

2021 census: what it means at the door

Every square is one home in a hundred.

  • 8 in 100 homes · newer homes
  • About 8% of homes in Vaughan were built in 1980 or earlier, according to the 2021 Census.Builder-grade cylinders in newer homes are usually simple to pick and bump. Households who want their door to resist more than a casual try can move to a high-security cylinder that drops into the same hardware they already own.
  • Single-detached houses make up about 63% of homes in Vaughan (2021 Census).Families in houses hand keys to children, cleaners, dog walkers and neighbours. A locksmith can set up a keypad on the side door for the household and keep the front door on a conventional key, so access matches how the family actually comes and goes.

Source: Statistics Canada, Census Profile

Open Concord in Google Maps

On-site assessment

Request a visit.

Arthritis has made the small house key hard to grip and turn, especially with gloves on in January.

(289) 216-9485, open 24/7.